SONDERHOFF SMART-M dosing cells with rotary indexing table

 

The component assembly of the SONDERHOFF SMART-M dosing cell for sealing foams, bonding or potting can also be done user-friendly via a rotary indexing table.

This has e.g. a 180° division for the loading and working position (other divisions possible), with a rotation cycle of approx. 1.5 sec. The insertion area is protected by a light grid for component assembly.

 

 

 

 

 

 

Animation of SONDERHOFF SMART-M dosing cells with rotary indexing table

Please see our animation of the new SONDERHOFF SMART-M with rotary indexing table, the dosing cell with the highest process stability for automated sealing foams, bonding and potting.

SMART-M dosing cell with rack trolley for pick & place assembly and storage of the finished components
Rotary indexing table rotates 180° into the dosing position for contour-accurate movement of the component for material application
Mixing head during the filling shot in the AIR-CLEAN unit

 

 

Dosed application of FERMAPOR K31 foam sealant into the groove of the filter frame

 

 

Left: The pneumatic AIR-CLEAN nozzle cleaning system cleans the mixing head nozzle using compressed air. Centre: Cleaning position for high-pressure water rinsing. Right: The laser-based NOZZLE-CONTROL nozzle measurement unit checks the dosing nozzle for positioning and contamination.

 

 

Mixing head in filling shot position above AIR-CLEAN unit

 

 

Metering nozzle in AIR-CLEAN unit for blowing off impurities with compressed air