Optional shuttle table for the 3E PUR

 

The SONDERHOFF 3E PUR dosing cell offers an attachable sliding table with manually shifting mounting plates as an alternative option for placement and processing of industrial parts for sealing, bonding, or potting. With this solution, a machine operator loads the two mounting plates with the parts in an alternating sequence. The parts are positioned in workpiece fixtures, which are fastened on the mounting plates made of coated multiplex.

The machine operator slides the mounting plates into the working area of the dosing cell and closes the lifting door. He then starts the dosing process.

 

 

 

Alternating shuttle mode

 

The machine operator positions the parts on the prepared workpiece fixtures fastened on the mounting plates, while in the dosing cell, with the lifting door closed, the CNC-controlled mixing head applies sealing material to the parts positioned on the other sliding table.

 

After the dispensing application, the machine operator opens the lifting door and pulls the sliding table with the finished parts out of the working area for removal.

 

 

Sliding table with connected mounting plates for oversized components

 

For material application on oversized components, the two mounting plates can be connected to form a single large sliding table.

 

 

The two mounting plates are connected by couplers to form one large sliding table.

 

 

In order to be able to produce oversized components with a maximum dimension of 2,500 x 1,250 x 250 mm (x/y/z), the two sliding table plates are joined together to form one large mounting plate.

 

Linear robot:

  • Max. travel speed: 15 m/min
  • Max. acceleration: 2 m/s²
  • Repeat accuracy: +/-1 mm 
  • Travel range x/y/z: 2.500 x 1.250 x 250 mm